Tableau Forensic Duplicator TD2u




















SUMMARY
The Tableau Forensic Duplicator was built to excel in both field and lab environments. It is a full-featured, fully-forensic duplicator that offers the ideal combination of easy operation, reliability, and ultra-fast forensic imaging of hard disks and solid-state-drives.
Winner of the Forensic 4:cast “2016 Computer Forensic Hardware of the Year” award.
A Tableau third-generation product, replacing the Tableau TD2.
FEATURES
Image SATA, USB 3.0, and IDE hard disks natively
Image SAS drives with the SAS Expansion Module
Standard operations:
- Disk-to-Disk (clone) duplication
- Disk-to-File (image) duplication
- Format
- Wipe
- Hash (MD5 or SHA-1)
- HPA/DCO detection and removal
- Blank Disk Check
Imaging speeds in excess of 15 GB/minute (.e01, compressed with MD5 and SHA-1 hashing)
Forensic mode always on (MD5 and SHA-1 hashing)
Capable of making one (1:1), two (1:2), or three (1:3) forensically-sound copies of digital storage devices
Outputs to raw DD, .e01 (compressed), .ex01 (compressed), or .dmg formats
Wiping speeds in excess of 25 GB/minute
Supports whole disk encryption of destination drives
Includes a color LCD for crisp, easy-to-view operational and device status information
Intuitive user interface provides easy operation with minimal training
Nine LEDs provide status on power, source drive detection, destination drive detection, and activity
Packaged in removable foam inserts custom-built to drop into a Pelican 1500 hard case
Free Tableau firmware updates
Compatibility | |
---|---|
IDE Devices | Parallel ATA hard drives with Logical Block Addressing (LBA) support |
Power Supply | Tableau model TP4 or TP5 |
SATA Devices | SATA I, II, or III hard drives |
USB Devices | USB 3.0, 2.0, and 1.1 devices |
Connectors: Destination Side | |
Drive Power | Two 3M-style 4-pin power connectors for the SATA drive |
SATA | Two SATA signal connectors |
USB 3.0 | One USB 3.0 Standard-A connector |
Connectors: Misc | |
One Mini-B USB 2.0 port for firmware updates | |
DC Input | One barrel connector for use with Tableau TP5 power supply |
USB | One Standard-A USB 2.0 port for USB printer, flash drive, or keyboard |
Connectors: Source Side | |
Drive Power | One 3M-style 4-pin power connector for the SATA or IDE drive |
IDE | One IDE signal connector |
SATA | One SATA signal connector |
USB 3.0 | One USB 3.0 Standard-A connector |
Physical / Environmental | |
DC Input | 13VDC (min) to 36VDC (max) |
DC Output | +5/12V @2A (spin-up) |
DC Output (per drive) | +5/12V @1A (continuous) |
Dimensions | 5.65 in. (L) x 5 in. (W) x 2.25 in. (H) |
Operating Temperature Range | 0 to 40 degrees C ambient (room temperature) |
Power | 11 Watts Typical Operating (Not Including Drive Power) |
Relative Humidity | Up to 90% (non-condensing) |
Storage Temperature Range | -40 to 70 degrees C |
Weight | 11.3oz (320g) |
Status LEDs | |
Alert | Flashing: activity paused, user response required |
Alert | Steady: read/write failure encountered |
Busy | Source or destination drive activity |
DC Power In | Power is available at power source |
IDE Source Detect | Flashing: detecting drive |
IDE Source Detect | Steady: drive detected |
Power | TD2u is powered on |
SATA Destination 1 Detect | Flashing: detecting drive |
SATA Destination 1 Detect | Steady: drive detected |
SATA Destination 2 Detect | Flashing: detecting drive |
SATA Destination 2 Detect | Steady: drive detected |
SATA Source Detect | Flashing: detecting drive |
SATA Source Detect | Steady: drive detected |
USB Destination Detect | Flashing: detecting drive |
USB Destination Detect | Steady: drive detected |
USB Source Detect | Flashing: detecting drive |
USB Source Detect | Steady: drive detected |
User Interface | |
Buttons | Two contextual "soft buttons" located under the LCD, five navigation buttons and one power on/off button |
LCD | 3.5 in. Graphic LCD (320 x 480 resolution) |
Warranty | |
One year parts and workmanship from date of purchase |