Tableau Forensic SATA Drive Bay T3iu
SUMMARY
The Tableau Forensic SATA Drive Bay is an integrated write-blocker that mounts in a drive bay of a forensic workstation and supports forensic acquisitions of 3.5” and 2.5” SATA hard drives.
FEATURES
Mounts in one 5.25” half-height drive bay
USB 3.0 host computer connection
Can double as a suspect drive cooler or drive tray for other storage media types
Read/write mode capability via internal DIP switch
Free Tableau firmware updates
| Compatibility | |
|---|---|
| Host Interface | USB 3.0 (Note: For the best USB 3.0 performance, ensure the latest host controller driver and BIOS update are applied) |
| Host OS | Windows XP/Vista/7/8/Newer, Macintosh OS X, most Linux distributions (note: Linux distributions have varying levels and quality of support for USB 3.0) |
| SATA Devices | SATA 2.5" or 3.5" HDD or SSD devices that conform to standard dimensions |
| Connectors: Device, Write-Blocked | |
| SATA | One SATA 3.5 in. slot with unified connector, and one SATA 2.5 in. slot with unified connector |
| Connectors: Host Side (Rear) | |
| DC Input | One 15-pin male SATA power connector for input DC power |
| USB 3.0 | One USB 3.0 Type B (9-pin) connector |
| Other Features | |
| Buttons | Two Buttons: 'U' update button used to set the T3iu in Firmware Update mode and a "Power" button |
| Status LEDs | Five LEDs: Power, Device (detect), Host (detect), Wrt Block (enabled), Activity |
| Physical / Environmental | |
| Power | 2.5 watts typical operating (not including hard disk) |
| Relative Humidity | Up to 90% (non-condensing) |
| Storage Temperature Range | -40 to 70 degrees C |
| Weight | 1.50 lbs (24oz or 680g) |
| Switches | |
| DIP Switch | The 4-position DIP switch (located on the rear of the unit) configures user-selectable options that aren't required for normal operation. See the Forensic Bridge DIP Switch Configuration Guide for more information |
| Warranty | |
| One year parts and workmanship from date of purchase |
